250 ml Paint Accelerator / Kicker / Rocket
2K SUPER ACCELERATOR is an additive which is used in small quantities with 2K hardeners to accelerate through curing. It may be used with normal or medium solids (MS) systems for air drying or stoving.
It accelerates the through - curing of 2K topcoats and 2K clear lacquers significantly reducing stoving times and offering increased throughput and
energy-saving in the bodyshop.
Open a fresh can of 2K hardener, remove the seal and add as follows:
Push the cap of the container down and loosen slightly.
Squeeze the container gently to fill the reservoir (10 ml.).
2K conventional hardeners : add 2 reservoirs full (20 ml.) per litre.
MS hardeners : add 3 reservoirs full (30 ml.) per litre.
Replace the lid tightly and shake well to mix the contents of the 2K hardener can.
Use the catalysed hardener in the normal way with 2K colours or 2K clear lacquers.
The addition of does not affect the application properties. Refer to the relevant data sheets for the 2K colours and 2K clear lacquers.
Drying depends on the hardener and thinner used and the air temperature. When air drying at 10 degrees celcius and above: at 50 microns dry film build - through dry overnight.
It is recommended that partly used cans of hardener be kept in cool, dry conditions and tightly sealed. If this is not done the hardener may react with moisture from the atmosphere and go cloudy or thick and gel like.
When the catalysed hardener is mixed with a 2K colour or 2K clear lacquer the mixture has a pot life of approximately 1 hour at 20 degrees Celsius.
As this is a flammable material - it will need to be sent on the couriers. This may incur a surcharge, depending on where you are.
Surcharges apply to Scotland, Ireland and Islands.
Similar manufactures may be sent.
Online price only - no collections.